Specifications — SVDA 6 A MX Distribution Amplifier
Video
Gain ................................................ Unity
Bandwidth ..................................... 30 MHz (-3 dB)
Frequency response .................... < 0.1 dB @ 15 MHz
Differential phase error .............. 0.03° at 3.58 MHz and 4.43 MHz
Differential gain error ................. 0.05% at 3.58 MHz and 4.43 MHz
Crosstalk ....................................... -60 dB @ 3.58 MHz
Video input
Number/signal type ................... 1 S-video
Connectors ................................... (1) 4-pin mini DIN female
Nominal level ............................... 1 Vp-p for Y of S-video
0.3 Vp-p for C of S-video
Minimum/maximum levels ....... Analog: 0.4 V to 1.4 Vp-p with no offset at unity gain
Impedance .................................... 75 ohms
Return loss .................................... <-30 dB @ 5 MHz
Video output
Number/signal type ................... 6 S-video
Connectors ................................... (6) 4-pin mini DIN
Nominal level ............................... 1 Vp-p for Y of S-video
0.3 Vp-p for C of S-video
Minimum/maximum levels ....... 0.4 V to 1.4 Vp-p
Impedance .................................... 75 ohms
Return loss .................................... <-30 dB @ 5 MHz
DC offset ....................................... 5 mV with input at 0 offset
Sync
Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Audio
Gain ................................................ Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response .................... 20 Hz to 20 kHz, 0.05 dB
THD + Noise ................................. 0.03% @ 1 kHz at nominal level
S/N ................................................ >90 dB, output 21 dB, balanced, at maximum output (unweighted)
Stereo channel separation .......... >80 dB @ 1 kHz; >60 dB @ 20 kHz
CMRR ............................................ >75 dB @ 20 Hz to 20 kHz
Audio input
Number/signal type ................... 1, 2, or 4 stereo balanced (Hi Z or 600 ohms), unbalanced (Hi Z)
Connectors ................................... (1, 2, or 4) 3.5 mm captive screw connector, 5 pole
Impedance .................................... >25k ohms balanced, 50k ohms unbalanced, DC coupled
Maximum level ............................ +24 dBu (balanced or unbalanced) at 1%THD+N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu
Audio output
Number/signal type ................... 6, 12, or 24 stereo, balanced/unbalanced
Connectors ................................... (6, 12, or 24) 3.5 mm captive screw connector, 5 pole
Impedance .................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ..................................... 0.1 dB channel to channel
Maximum level (Hi-Z) ................ >+24 dBu, balanced or unbalanced at 1%THD+N
Maximum level (600 ohm) ......... >+15 dBm, balanced or unbalanced at 1%THD+N
1-2
SVDA 6 A MX Distribution Amplifier • Specifications
|
Eagle Electronics Pager PG 2091F User Manual
Edelbrock Automobile Parts Ford FE User Manual
Eton Weather Radio ARCFR160WXR RED User Manual
Fisher Price Crib Toy N1128N1128 User Manual
Fluke Welding System 4265A User Manual
Gaggenau Cookware Wok User Manual
Geemarc Corded Headset CLA3 User Manual
GE Microwave Oven CSA1201 User Manual
GE Network Card GFK 1541B User Manual
Gianni Industries Door DG 27WP User Manual